X_1:=1.3;
X_8:=REF(VOL,1);
X_9:=REF(VOL,2);
X_10:=REF(VOL,3);
X_11:=REF(CLOSE,1);
X_12:=REF(CLOSE,2);
X_13:=REF(CLOSE,3);
X_14:=REF(CLOSE,4);
X_17:=REF(OPEN,3);
X_18:=REF(OPEN,4);
X_19:=CLOSE>=X_13 AND X_11>=X_13 AND X_12>=X_13;
X_20:=LOW>X_17 AND REF(LOW,1)>X_17 AND REF(LOW,2)>X_17;
X_21:=AMOUNT/VOL/100;
X_22:=REF(X_21,1);
X_23:=REF(X_21,2);
X_26:=X_13>X_17;
X_27:=X_21>=X_22 OR CLOSE>X_11 AND (X_22>=X_23 OR X_11>=X_12);
X_28:=(CLOSE+X_11+X_12)/3>X_13;
X_29:=VOL>X_8 AND X_8>X_9;
X_30:=VOL<=X_8 AND X_8<=X_9;
X_31:=(VOL+X_8+X_9)/3<=X_10 AND NOT(X_29);
X_32:=CLOSE/VOL;
X_33:=X_32>=REF(X_32,1) AND REF(X_32,1)>=REF(X_32,2);
X_34:=(CLOSE+X_11+X_12)/3/X_13;
X_35:=(VOL+X_8+X_9)/3/X_10;
X_36:=X_1*X_34/X_35>1;
X_37:=X_17>X_14 AND X_14>X_18;
X_38:=X_26 AND X_27 AND X_30 AND X_19 AND X_20 AND X_37;
X_41:=X_26 AND X_27 AND X_30 AND X_19 AND X_20;
X_53:=X_26 AND X_27 AND X_31 AND NOT(X_29) AND X_19 AND X_20 AND X_37 AND NOT(X_41) AND NOT(X_38);
X_56:=X_26 AND X_27 AND X_31 AND NOT(X_29) AND X_19 AND X_20 AND NOT(X_41) AND NOT(X_38);
X_68:=X_26 AND X_28 AND X_30 AND X_19 AND X_20 AND X_37 AND NOT(X_41) AND NOT(X_56) AND NOT(X_38) AND NOT(X_53);
X_71:=X_26 AND X_28 AND X_30 AND X_19 AND X_20 AND NOT(X_41) AND NOT(X_56) AND NOT(X_38) AND NOT(X_53);
X_83:=X_26 AND X_28 AND X_31 AND X_19 AND X_20 AND X_37 AND NOT(X_41) AND NOT(X_38) AND NOT(X_56) AND NOT(X_53) AND NOT(X_71) AND NOT(X_68);
X_86:=X_26 AND X_28 AND X_31 AND X_19 AND X_20 AND NOT(X_41) AND NOT(X_56) AND NOT(X_71) AND NOT(X_38) AND NOT(X_53) AND NOT(X_68);
X_98:=X_26 AND X_28 AND X_36 AND X_19 AND X_20 AND X_37 AND NOT(X_41) AND NOT(X_56) AND NOT(X_71) AND NOT(X_86) AND NOT(X_38) AND NOT(X_53) AND NOT(X_68) AND NOT(X_83);
X_101:=X_26 AND X_28 AND X_36 AND X_19 AND X_20 AND NOT(X_41) AND NOT(X_56) AND NOT(X_71) AND NOT(X_86) AND NOT(X_38) AND NOT(X_53) AND NOT(X_68) AND NOT(X_83);
X_116:=X_26 AND X_28 AND X_33 AND X_19 AND X_20 AND NOT(X_41) AND NOT(X_56) AND NOT(X_71) AND NOT(X_86) AND NOT(X_101) AND NOT(X_38) AND NOT(X_53) AND NOT(X_68) AND NOT(X_83) AND NOT(X_98);
X_128:=X_41 OR X_56 OR X_71 OR X_86 OR X_101 OR X_116;
{WWW.GPXIAZAI.COM}
X_129:=HHV(HIGH,60);
X_130:=LLV(LOW,60);
X_131:=REFDATE(X_129,DATE);
X_132:=REFDATE(X_130,DATE);
X_134:=X_131;
X_135:=X_132;
X_136:=X_134-(X_134-X_135)*0.666;
底部双王回踩:CLOSE<X_136 AND COUNT(X_128,16)>=2 AND CLOSE<REF(CLOSE,1) AND VOL<REF(VOL,1)*0.67 AND DYNAINFO(4)>0 AND BARSLASTCOUNT(VOL>0)>60;
